How to use the rebar quantity calculator
This calculator helps you calculate grid bar counts, steel weight and material cost for one reinforcement layer. It is intended for quantity takeoffs, early budgets and checks against a measured schedule. Start with the dimensions or quantities for one clearly defined item of work. Enter values in the units shown beside each field; millimetres and metres are not interchangeable.
Area alone does not define a grid: enter slab length so width can be calculated as area ÷ length. One layer, bars at both edges, no cover deduction, laps, stock-length cutting or waste.
Step-by-step takeoff workflow
- Enter your measured dimensions and inputs: Input the project values for Slab area (m²), Slab length (m), Spacing across width (mm), Spacing across length (mm), Bar diameter (mm), Steel price per kg (selected currency). Check that every measurement uses the exact unit shown beside its field.
- Review the live quantity and formula calculation: The calculator applies Bars parallel to L = ceil(W / spacing) + 1; total length = nL × L + nW × W immediately in your browser and displays the primary and secondary takeoff figures.
- Carry forward to cost, BoQ, CSV or printable takeoff sheet: Send your calculated quantity directly to Concrete Cost, Markup / Margin or the Bill of Quantities (BoQ) worksheet, or export via CSV and Print / PDF.
Worked example
For 24 m² at 6 m length, width is 4 m. At 200 mm centres both ways, there are 21 lengthwise bars and 31 crosswise bars.
Quick-reference lookup table
| Bar spacing (centres) | Lengthwise bars (6 m) | Crosswise bars (4 m) | Combined bar length | Net steel mass (12 mm) |
|---|---|---|---|---|
| 150 mm centres | 28 bars | 41 bars | 332.0 m | 295.1 kg |
| 200 mm centres | 21 bars | 31 bars | 250.0 m | 222.2 kg |
| 250 mm centres | 17 bars | 25 bars | 202.0 m | 179.6 kg |
| 300 mm centres | 15 bars | 21 bars | 174.0 m | 154.7 kg |
Before you order
Compare the result with your drawings and supplier information. Keep the original net quantity separate from allowances, and round purchasing quantities only at the ordering stage. Check whether delivery, labour and related materials belong elsewhere in your estimate. If the drawing or specification changes, update the inputs and record the revised basis instead of reusing an earlier total.
For the concepts behind this calculation, read Rebar (Reinforcement Steel), Lap Length, Wastage Factor.
Common questions & estimating checks
What formula does the rebar quantity calculator use?
Bars parallel to L = ceil(W / spacing) + 1; total length = nL × L + nW × W — Area alone does not define a grid: enter slab length so width can be calculated as area ÷ length. One layer, bars at both edges, no cover deduction, laps, stock-length cutting or waste.
How do you work out a rebar quantity example?
For 24 m² at 6 m length, width is 4 m. At 200 mm centres both ways, there are 21 lengthwise bars and 31 crosswise bars.
Which inputs and units are required for this calculation?
You enter Slab area (m²), Slab length (m), Spacing across width (mm), Spacing across length (mm), Bar diameter (mm), Steel price per kg (selected currency). Keep metres and millimetres distinct, and use the header currency selector to display monetary amounts in EUR, GBP, USD or a custom currency code.
What should I check before ordering materials from a rebar quantity estimate?
Verify dimensions against approved construction drawings, confirm supplier pack sizes and product yields, and keep net measured quantities separate from cutting or site wastage allowances.