REINFORCEMENT

Rebar Weight calculator

Convert bar diameter and total length into kilograms.

YOUR MEASUREMENTS

Rebar Weight

╬
↻ Results update as you type
YOUR ESTIMATELIVE
Total steel weight
88.889kg
Weight per metre0.889 kg/m
CONNECT TO COST, LABOUR & BOQ
Open BoQ ↗

An estimate for planning. Currency selection changes the display symbol only (no exchange-rate conversion). Verify measurements and product specifications before ordering.

THE FORMULAWeight per metre = diameter² / 162; total weight = kg/m × length
ASSUMPTIONSThe d²/162 relationship is a practical approximation for steel bar mass. Enter diameter in millimetres and the combined length of every bar in metres.
UNDERSTAND YOUR ESTIMATE

How to use the rebar weight calculator

This calculator helps you convert bar diameter and total length into an estimated steel weight. It is intended for quantity takeoffs, early budgets and checks against a measured schedule. Start with the dimensions or quantities for one clearly defined item of work. Enter values in the units shown beside each field; millimetres and metres are not interchangeable.

The d²/162 relationship is a practical approximation for steel bar mass. Enter diameter in millimetres and the combined length of every bar in metres.

Step-by-step takeoff workflow

  1. Enter your measured dimensions and inputs: Input the project values for Bar diameter (mm), Total bar length (m). Check that every measurement uses the exact unit shown beside its field.
  2. Review the live quantity and formula calculation: The calculator applies Weight per metre = diameter² / 162; total weight = kg/m × length immediately in your browser and displays the primary and secondary takeoff figures.
  3. Carry forward to cost, BoQ, CSV or printable takeoff sheet: Send your calculated quantity directly to Concrete Cost, Markup / Margin or the Bill of Quantities (BoQ) worksheet, or export via CSV and Print / PDF.

Worked example

A 12 mm bar weighs approximately 0.889 kg/m. A combined 100 m length weighs about 88.9 kg.

Quick-reference lookup table

Quick reference: Standard steel reinforcing bar unit mass (d² ÷ 162)
Bar diameter (mm)Cross-section areaMass per metre (kg/m)Weight of 12 m stock barWeight per 100 m
8 mm (H8)50.3 mm²0.395 kg/m4.74 kg39.5 kg
10 mm (H10)78.5 mm²0.617 kg/m7.41 kg61.7 kg
12 mm (H12)113.1 mm²0.889 kg/m10.67 kg88.9 kg
16 mm (H16)201.1 mm²1.580 kg/m18.96 kg158.0 kg
20 mm (H20)314.2 mm²2.469 kg/m29.63 kg246.9 kg
25 mm (H25)490.9 mm²3.858 kg/m46.30 kg385.8 kg
32 mm (H32)804.2 mm²6.321 kg/m75.85 kg632.1 kg

Before you order

Compare the result with your drawings and supplier information. Keep the original net quantity separate from allowances, and round purchasing quantities only at the ordering stage. Check whether delivery, labour and related materials belong elsewhere in your estimate. If the drawing or specification changes, update the inputs and record the revised basis instead of reusing an earlier total.

For the concepts behind this calculation, read Rebar (Reinforcement Steel), Rebar Grades, Unit Rate.

Common questions & estimating checks

What formula does the rebar weight calculator use?

Weight per metre = diameter² / 162; total weight = kg/m × length — The d²/162 relationship is a practical approximation for steel bar mass. Enter diameter in millimetres and the combined length of every bar in metres.

How do you work out a rebar weight example?

A 12 mm bar weighs approximately 0.889 kg/m. A combined 100 m length weighs about 88.9 kg.

Which inputs and units are required for this calculation?

You enter Bar diameter (mm), Total bar length (m). Keep metres and millimetres distinct, and use the header currency selector to display monetary amounts in EUR, GBP, USD or a custom currency code.

What should I check before ordering materials from a rebar weight estimate?

Verify dimensions against approved construction drawings, confirm supplier pack sizes and product yields, and keep net measured quantities separate from cutting or site wastage allowances.