GENERAL COST ESTIMATION

Cost Per m² / Sq Ft calculator

Benchmark a project, or build a budget from a rate.

YOUR MEASUREMENTS

Cost Per m² / Sq Ft

↗
↻ Results update as you type
YOUR ESTIMATELIVE
Cost per m²
€2,000/m²
CONNECT TO COST, LABOUR & BOQ
Open BoQ ↗

An estimate for planning. Currency selection changes the display symbol only (no exchange-rate conversion). Verify measurements and product specifications before ordering.

THE FORMULAUnit rate = total cost / area; estimated cost = area × rate
ASSUMPTIONSThe area and rate must use the same measurement basis. Enter the area in the selected unit; switching the label does not convert an existing value. No location or market benchmark is implied.
UNDERSTAND YOUR ESTIMATE

How to use the cost per m² / sq ft calculator

This calculator helps you calculate a cost per unit of floor area or estimate a total from a known rate. It is intended for quantity takeoffs, early budgets and checks against a measured schedule. Start with the dimensions or quantities for one clearly defined item of work. Enter values in the units shown beside each field; millimetres and metres are not interchangeable.

The area and rate must use the same measurement basis. Enter the area in the selected unit; switching the label does not convert an existing value. No location or market benchmark is implied.

Step-by-step takeoff workflow

  1. Enter your measured dimensions and inputs: Input the project values for Calculation mode, Area unit, Floor area (selected unit), Total build cost (selected currency), Known rate per area (selected currency). Check that every measurement uses the exact unit shown beside its field.
  2. Review the live quantity and formula calculation: The calculator applies Unit rate = total cost / area; estimated cost = area × rate immediately in your browser and displays the primary and secondary takeoff figures.
  3. Carry forward to cost, BoQ, CSV or printable takeoff sheet: Send your calculated quantity directly to Concrete Cost, Markup / Margin or the Bill of Quantities (BoQ) worksheet, or export via CSV and Print / PDF.

Worked example

A total cost of 240,000 for 120 m² gives 2,000 per m². Applying that same rate to 150 m² gives an estimated 300,000.

Quick-reference lookup table

Quick reference: Early-stage construction budget matrix by gross internal floor area (m²)
Floor area (m²)Area in sq ft (ft²)At 1,500 per m²At 2,000 per m²At 2,500 per m²
50 m² (extension)538 ft²75,000100,000125,000
100 m² (compact home)1,076 ft²150,000200,000250,000
120 m² (3-bed house)1,292 ft²180,000240,000300,000
180 m² (detached home)1,938 ft²270,000360,000450,000
250 m² (large unit)2,691 ft²375,000500,000625,000

Before you order

Compare the result with your drawings and supplier information. Keep the original net quantity separate from allowances, and round purchasing quantities only at the ordering stage. Check whether delivery, labour and related materials belong elsewhere in your estimate. If the drawing or specification changes, update the inputs and record the revised basis instead of reusing an earlier total.

For the concepts behind this calculation, read Cost Plan, Unit Rate, Elemental Cost Analysis.

Common questions & estimating checks

What formula does the cost per m² / sq ft calculator use?

Unit rate = total cost / area; estimated cost = area × rate — The area and rate must use the same measurement basis. Enter the area in the selected unit; switching the label does not convert an existing value. No location or market benchmark is implied.

How do you work out a cost per m² / sq ft example?

A total cost of 240,000 for 120 m² gives 2,000 per m². Applying that same rate to 150 m² gives an estimated 300,000.

Which inputs and units are required for this calculation?

You enter Calculation mode, Area unit, Floor area (selected unit), Total build cost (selected currency), Known rate per area (selected currency). Keep metres and millimetres distinct, and use the header currency selector to display monetary amounts in EUR, GBP, USD or a custom currency code.

What should I check before ordering materials from a cost per m² / sq ft estimate?

Verify dimensions against approved construction drawings, confirm supplier pack sizes and product yields, and keep net measured quantities separate from cutting or site wastage allowances.