TIMBER / FRAMING

Timber Volume / Cost calculator

Member volumes, board feet and material cost.

YOUR MEASUREMENTS

Timber Volume / Cost

⊞
↻ Results update as you type
YOUR ESTIMATELIVE
Timber volume
0.015m³
Board feet6.357 bd ft
Material cost€9
CONNECT TO COST, LABOUR & BOQ
Open BoQ ↗

An estimate for planning. Currency selection changes the display symbol only (no exchange-rate conversion). Verify measurements and product specifications before ordering.

THE FORMULAVolume = length × width × depth × quantity; cost = volume × rate
ASSUMPTIONSUse actual section dimensions for geometric volume. Nominal sizes can differ from finished dimensions. Board feet are converted from actual volume, not a supplier’s nominal tally.
UNDERSTAND YOUR ESTIMATE

How to use the timber volume / cost calculator

This calculator helps you calculate timber volume, board feet and material cost from actual member dimensions. It is intended for quantity takeoffs, early budgets and checks against a measured schedule. Start with the dimensions or quantities for one clearly defined item of work. Enter values in the units shown beside each field; millimetres and metres are not interchangeable.

Use actual section dimensions for geometric volume. Nominal sizes can differ from finished dimensions. Board feet are converted from actual volume, not a supplier’s nominal tally.

Step-by-step takeoff workflow

  1. Enter your measured dimensions and inputs: Input the project values for Member length (m), Actual width (m), Actual depth (m), Quantity, Price per cubic metre (selected currency). Check that every measurement uses the exact unit shown beside its field.
  2. Review the live quantity and formula calculation: The calculator applies Volume = length × width × depth × quantity; cost = volume × rate immediately in your browser and displays the primary and secondary takeoff figures.
  3. Carry forward to cost, BoQ, CSV or printable takeoff sheet: Send your calculated quantity directly to Concrete Cost, Markup / Margin or the Bill of Quantities (BoQ) worksheet, or export via CSV and Print / PDF.

Worked example

Twenty 3 m members at 100 mm × 50 mm contain 0.3 m³. At 600 per m³, material cost is 180 before wastage and delivery.

Quick-reference lookup table

Quick reference: Timber volume (m³) and board feet per 100 linear metres of section
Actual section (W × D)Total linear lengthVolume (m³)Board feet (bd ft)Cost at 600 per m³
47 mm × 100 mm (0.047 × 0.10 m)100 m (e.g. 25 × 4.0 m)0.470 m³199.2 bd ft282
47 mm × 150 mm (0.047 × 0.15 m)100 m (e.g. 25 × 4.0 m)0.705 m³298.8 bd ft423
47 mm × 200 mm (0.047 × 0.20 m)100 m (e.g. 20 × 5.0 m)0.940 m³398.3 bd ft564
75 mm × 150 mm (0.075 × 0.15 m)100 m (e.g. 25 × 4.0 m)1.125 m³476.7 bd ft675
100 mm × 100 mm (0.10 × 0.10 m)100 m (e.g. 33 × 3.0 m)1.000 m³423.8 bd ft600

Before you order

Compare the result with your drawings and supplier information. Keep the original net quantity separate from allowances, and round purchasing quantities only at the ordering stage. Check whether delivery, labour and related materials belong elsewhere in your estimate. If the drawing or specification changes, update the inputs and record the revised basis instead of reusing an earlier total.

For the concepts behind this calculation, read Unit Rate, Wastage Factor, Takeoff (Quantity Takeoff).

Common questions & estimating checks

What formula does the timber volume / cost calculator use?

Volume = length × width × depth × quantity; cost = volume × rate — Use actual section dimensions for geometric volume. Nominal sizes can differ from finished dimensions. Board feet are converted from actual volume, not a supplier’s nominal tally.

How do you work out a timber volume / cost example?

Twenty 3 m members at 100 mm × 50 mm contain 0.3 m³. At 600 per m³, material cost is 180 before wastage and delivery.

Which inputs and units are required for this calculation?

You enter Member length (m), Actual width (m), Actual depth (m), Quantity, Price per cubic metre (selected currency). Keep metres and millimetres distinct, and use the header currency selector to display monetary amounts in EUR, GBP, USD or a custom currency code.

What should I check before ordering materials from a timber volume / cost estimate?

Verify dimensions against approved construction drawings, confirm supplier pack sizes and product yields, and keep net measured quantities separate from cutting or site wastage allowances.