CONCRETE STRUCTURES

Concrete Column calculator

Round or rectangular columns, by the pour.

YOUR MEASUREMENTS

Concrete Column

▱
↻ Results update as you type
YOUR ESTIMATELIVE
Concrete volume
0.212m³
Cubic yards0.277 yd³
Budget rebar allowance25.447 kg
CONNECT TO COST, LABOUR & BOQ
Open BoQ ↗

An estimate for planning. Currency selection changes the display symbol only (no exchange-rate conversion). Verify measurements and product specifications before ordering.

THE FORMULAVolume = cross-sectional area × height × quantity
ASSUMPTIONSRebar is a user-defined weight allowance only, not a bar schedule or structural design. It cannot determine safe column dimensions, reinforcement arrangement or load capacity.
UNDERSTAND YOUR ESTIMATE

How to use the concrete column calculator

This calculator helps you measure round or rectangular columns and estimate a stated reinforcement allowance. It is intended for quantity takeoffs, early budgets and checks against a measured schedule. Start with the dimensions or quantities for one clearly defined item of work. Enter values in the units shown beside each field; millimetres and metres are not interchangeable.

Rebar is a user-defined weight allowance only, not a bar schedule or structural design. It cannot determine safe column dimensions, reinforcement arrangement or load capacity.

Step-by-step takeoff workflow

  1. Enter your measured dimensions and inputs: Input the project values for Column shape, Diameter (m), Width (m), Depth (m), Height (m), Quantity, Assumed reinforcement intensity (kg/m³). Check that every measurement uses the exact unit shown beside its field.
  2. Review the live quantity and formula calculation: The calculator applies Volume = cross-sectional area × height × quantity immediately in your browser and displays the primary and secondary takeoff figures.
  3. Carry forward to cost, BoQ, CSV or printable takeoff sheet: Send your calculated quantity directly to Concrete Cost, Markup / Margin or the Bill of Quantities (BoQ) worksheet, or export via CSV and Print / PDF.

Worked example

A 300 mm diameter column, 3 m high, has a volume of about 0.212 m³. Multiply by the number of identical columns.

Quick-reference lookup table

Quick reference: Single 3.0 m high column concrete volume and steel allowance (at 120 kg/m³)
Column sectionCross-section areaConcrete volume (m³)Volume (yd³)Budget steel (120 kg/m³)
250 mm diameter round0.049 m²0.147 m³0.193 yd³17.7 kg
300 mm diameter round0.071 m²0.212 m³0.277 yd³25.4 kg
400 mm diameter round0.126 m²0.377 m³0.493 yd³45.2 kg
300 × 300 mm square0.090 m²0.270 m³0.353 yd³32.4 kg
400 × 400 mm square0.160 m²0.480 m³0.628 yd³57.6 kg

Before you order

Compare the result with your drawings and supplier information. Keep the original net quantity separate from allowances, and round purchasing quantities only at the ordering stage. Check whether delivery, labour and related materials belong elsewhere in your estimate. If the drawing or specification changes, update the inputs and record the revised basis instead of reusing an earlier total.

For the concepts behind this calculation, read Rebar (Reinforcement Steel), Concrete Grade, Formwork.

Common questions & estimating checks

What formula does the concrete column calculator use?

Volume = cross-sectional area × height × quantity — Rebar is a user-defined weight allowance only, not a bar schedule or structural design. It cannot determine safe column dimensions, reinforcement arrangement or load capacity.

How do you work out a concrete column example?

A 300 mm diameter column, 3 m high, has a volume of about 0.212 m³. Multiply by the number of identical columns.

Which inputs and units are required for this calculation?

You enter Column shape, Diameter (m), Width (m), Depth (m), Height (m), Quantity, Assumed reinforcement intensity (kg/m³). Keep metres and millimetres distinct, and use the header currency selector to display monetary amounts in EUR, GBP, USD or a custom currency code.

What should I check before ordering materials from a concrete column estimate?

Verify dimensions against approved construction drawings, confirm supplier pack sizes and product yields, and keep net measured quantities separate from cutting or site wastage allowances.