CATEGORY GUIDE

Concrete Structures

Practical quantities, clear assumptions and the terms behind them.

ESTIMATING FIELD NOTES

How to approach concrete structures quantities

Concrete takeoffs separate net geometric volume in cubic metres from ordering allowances, bag yields and temporary formwork contact areas. Measure each structural element once so slab, beam and column intersections are never double-counted.

TAKEOFF CHECKLIST
  • Keep net geometric volume separate from wastage and pump or minimum-load allowances.
  • Verify whether formwork includes soffits, sides, end stops or opening deductions.
  • Check product bag yields in cubic metres per bag against the supplier datasheet.
  • Confirm concrete strength class and exposure designation on the structural drawings.
▱↗

Concrete Volume

Slabs, bases and pours. Get the volume right.

Concrete Structures
▱↗

Concrete Cost

Turn your concrete quantity into a material budget.

Concrete Structures
▱↗

Concrete Column

Round or rectangular columns, by the pour.

Concrete Structures
▱↗

Concrete Beam

Concrete and three-sided formwork for beams.

Concrete Structures
▱↗

Concrete Wall

Wall volume and formwork on both faces.

Concrete Structures
▱↗

Concrete Slab

Concrete, bag counts and mesh coverage.

Concrete Structures
▱↗

Concrete Stairs

A solid stepped block, measured tread by tread.

Concrete Structures

Common questions on concrete structures estimating

How do you avoid double-counting concrete at slab, beam and column junctions?

Measure each primary element to a consistent hierarchy (for example, slabs measured full plan area, beam depth measured as the downstand below the slab soffit, and columns measured floor-to-soffit) and state that basis in your takeoff notes.

What wastage allowance is typical for in-situ concrete pours?

Clean shuttered elements often carry 2.5% to 5% wastage, whereas ground-bearing slabs, trenches and pumped pours commonly require 5% to 10% depending on formation regularity and pump line losses.

Terms for this category

Takeoff (Quantity Takeoff) ↗Measured Works ↗Concrete Grade ↗Rebar (Reinforcement Steel) ↗Wastage Factor ↗Formwork ↗Damp Proof Membrane (DPM) ↗Aggregate ↗Unit Rate ↗Rate Build-Up ↗