Masonry & Finishes
Practical quantities, clear assumptions and the terms behind them.
How to approach masonry & finishes quantities
Masonry and finish takeoffs convert net wall or floor areas into unit counts, bedding volumes, wet coat volumes and whole containers. Deductions for openings and allowances for cutting waste should remain visible in your takeoff record.
- Confirm actual coordinating and work sizes of bricks, blocks and tiles in millimetres.
- Deduct window and door openings consistently before adding cutting and breakage wastage.
- Distinguish geometric joint or coat volume from dry bagged mortar, render, screed or grout mass.
- Check primer requirements, substrate porosity and number of coats for paint coverage.
Brickwork
Masonry units and a geometric mortar allowance.
Masonry & FinishesBlockwork
Masonry units and a geometric mortar allowance.
Masonry & FinishesPlastering / Render
From coverage and thickness to mix and bags.
Masonry & FinishesScreed
From coverage and thickness to mix and bags.
Masonry & FinishesPaint Coverage
Paint quantities, coats and whole cans.
Masonry & FinishesTile & Grout
Tile counts and joint-fill volume.
Masonry & FinishesCommon questions on masonry & finishes estimating
How many standard bricks or blocks are in a square metre of single-leaf wall?
With a 10 mm mortar joint, a standard 215 × 65 mm metric brick requires 59.26 bricks per m² (commonly rounded to 60/m² before wastage), while a 440 × 215 mm block requires 9.88 blocks per m² (10/m² before wastage).
Why does dry bagged mortar or grout consumption differ from geometric joint volume?
Geometric joint volume measures the net wet space between units. Dry bag quantities depend on mix bulk density, water ratio, frog or core filling and site bed losses.